Advertisement
Wireless Network
You can setup a wireless network connection in
four ways:
- Wireless Automatic
- Wireless Manual
- WPS(PBC)
- WPS(PIN)
When you configure the wireless network
connection, any wireless network devices currently
connected through the player or, if applicable,
the player's current wired connection, will be
disconnected.
a Wireless - Automatic
1,
2.
3.
4.
In the Home screen, select Settings, and
then press the _
button.
Select Network, and then press the
button.
Select Network Settings, and then press the
button.
Select Wireless in the Network Settings
screen, and then press the _
button. The
player searches for and then displays a list of
the available networks.
iiii_
iiii_
5.
Select the desired network, and then press
the _
button.
6.
On the Security screen, enter your network's
Security Code or Pass Phrase.
Enter numbers directly using the number
buttons on your remote control. Enter letters
by selecting a letter with an arrow button, and
then pressing _
button.
IINOTES t
Toviewthepassword asyouenterit, usethearrow
buttons to selectShowPasswordonthe rightside,and
thenpress_
button.
7.
When done, select Done and then press the
button. The player verifies the network
connection and then connects to the
network.
8.
When verification is complete, select OK, and
then press the _
button.
IINOTES t
Youshouldbeableto findthe Security Codeor Pass
Phrase ononeof thesetupscreens you usedto setup
yourrouteror modem,
Wireless - Manual
If you have a static IP address or the Automatic
procedure does not work, you'll need to set the
Network Settings values manually.
1.
Follow the directions in Wireless - Automatic
through Step 5.
2.
The player searches for a network, and then
displays the connection failed message.
3.
On the bottom of the screen, select mP
Settings, and then press the _
button.
The IP Settings screen appears.
4.
Select the IP Setting field, and then press the
button.
5.
Select Enter manuaIRy in the IP Setting field,
and then press the _
button.
O
CO
@
English 27
Advertisement
