Recalling A Preset Station - Yamaha R-S700 Owner's Manual

FM/AM TUNING
1
Tune in to the desired FM/AM station.
See pages 18 and 19 for tuning instructions.
2
Press MEMORY on the front panel.
"MANUAL PRESET" is displayed briefly on the
front panel display, and then the preset number to
which the station will be registered is displayed.
y
By holding down MEMORY on the front panel for more than
2 seconds, you can skip the following steps and automatically
register the selected station to an empty preset number (i.e., the
preset number following the last preset number used).
3
Press PRESET j / i on the front panel (or
PRESET F / G on the remote control) to
select the preset number to which the station
will be registered.
When you select a preset number to which no station
is registered, "EMPTY" is displayed. When you
select a preset number to which a station has already
been registered, the frequency of the station is
displayed.
Preset number
y
You can also select a preset number using the numeric buttons on
the remote control.
4
Press MEMORY on the front panel.
When registration is complete, the display returns to
the original state.
y
To cancel registration, RETURN on the remote control or do not
perform any operations for about 30 seconds.
22
En

Recalling a preset station

You can recall preset stations that were registered using
automatic station preset or manual station preset.
1
Press PRESET j / i on the front panel (or
PRESET F / G on the remote control) to
select a preset number.
y
• Preset numbers to which no stations are registered are skipped.
• "NO PRESETS" is displayed if no stations are registered.
• You can directly select a preset number by pressing the numeric
buttons on the remote control while recalling a preset station.
"EMPTY" is displayed on the display if you enter a preset
number to which no station is registered. "WRONG NUM." is
displayed if you enter an invalid number.
• When you press the numeric buttons on the remote control
during normal tuning, a frequency is entered. Set the tuning
mode to preset tuning mode using PRESET j / i on the front
panel (or PRESET F / G on the remote control) before
pressing numeric buttons.
PRESET j / i
PRESET F / G