Using Dishwasher Salt; Filling The Salt Reservoir - Samsung DW-BG970 Series User Manual

using the sound on/off function
1. While holding down the delay start
access the setting to activate/deactivate the Sound On/Off function.
2. Press the sanitize
- "Rinse Refill " indicator turns on to indicate that Sound On function has been activated.
- "Rinse Refill " indicator turns off to indicate that Sound Off function has been activated.
Even though Sound Off function has been activated, the error sound plays when an error occurs.
3. To exit the Sound On/Off setting, press the power

using dishWasher salt

Filling the salt reservoir

In order to use soft water, you need to fill the salt reservoir with dishwasher salt.
Use dishwasher salt only.
Do not use any other type of salt or solvent. This may damage the salt reservoir and the water
CAUTION
softening system.
1. Open the door.
2. Open the salt reservoir cap by rotating it counterclockwise.
3. Fill the salt reservoir with water(only required when switching on the
appliance for the first time)
4. Add the dishwasher salt.
The salt reservoir's capacity is about 1 kg. Do not overfill the salt
reservoir.
CAUTION
5. Remove excess salt from around the salt reservoir opening and cap
seal.
If the excess salt is not removed, the salt reservoir cap may not
close properly and allow salt water flow out with negative impact
CAUTION
to the performance.
6. Rotate the salt reservoir cap clockwise until it is completely shut.
If you are not planning on washing dishes right away, run the
Prewash
Depending on the size of the salt grains, it may take a while for
the salt to dissolve and the "Salt Refill " indicator to turn off.
DD68-00092A_EN.indd 13
and half load
button to activate or deactivate the Sound On/Off function.
to clean the cabinet of excess salt.
buttons, press the power
button.
Before using for the first time
button to
_13
10/14/2011 3:08:55 PM