Download  Print this page

Care And Cleaning; Cleaning The Filters And The Indoor Unit - Mitsubishi Electric PEAD-RP1.6EA Operation Manual

Hide thumbs


Table of Contents

3. Care and cleaning


3.1. Cleaning the filters and the indoor unit

Care and cleaning
• Be sure to turn the ON/OFF switch to the OFF position before proceed-
ing with care and handling of the unit.
Cleaning the indoor unit
• Wipe the unit with a dry, soft cloth.
• Do not attempt to pull the vertical air vanes forcibly by hands to prevent
possible damage or malfunction.
• Use a household detergent (for tableware cleaning or cloth washing) to
remove fingerprint and oil stains.
• Do not use gasoline, benzine, thinner, and polishing powder which could
damage the unit.
Removing the air filter
Be sure to check on the location and the way of setting with the contractor
when the unit performs a trial run.
A Air intake
B Filter
Cleaning filters
• Air filter cleaning method varies according to filter material. Read in-
struction concerning filter material and cleaning method carefully. Gen-
eral method for cleaning filters is shown below.
• Tap lightly or clean with vacuum cleaner. Rinse in water or neutral deter-
gent dissolved in lukewarm water if filters are especially dirty. Be sure to
throughly rinse off any detergent used.Dry before reinstalling into air
• Do not dry filters in direct sunlight or by other heat sources. Heat
may disfigure filters.
• Washing in hot water (over 50
C Screw (Only RP·EA)
C) may disfigure filters.


Table of Contents

   Also See for Mitsubishi Electric PEAD-RP1.6EA

   Related Manuals for Mitsubishi Electric PEAD-RP1.6EA

Comments to this Manuals

Symbols: 0
Latest comments: