Download Print this page

Activation And Use Of The Front Electric Brake - Electrolux AR 4090 Operating Instructions Manual

Hide thumbs

Advertisement

ACTIVATION AND USE OF THE FRONT
ELECTRIC BRAKE
Warning: before using the machine the front
electric brake must be set according to the
folowing instructions.
Push the pedal of the rear mechanical brake
to stop the machine when removing it from
the pallet.
Remove the rubber protection from the elctric
brake on the front drive wheel.
To set the brake scews A and B must be
removed (keep them for further use)
Note: after having removed the two screws it will
not be possible to move/push the machine untill
the battery will have been installed and
activated.
Fit carefully the rubber protection on the brake.
Now the brake is set.
In the event of a failure - on the field - of the
electronic drive control in order to be able to
push the machine it is necessary first to
disengage the electric brake, according to the
following instruction.
5
S31EUK4090SY(2)99-01
A
B

Advertisement

loading

  Also See for Electrolux AR 4090

  Related Manuals for Electrolux AR 4090

This manual is also suitable for:

Ar 4095Ar 4100