How To Identify Parts Of Vacuum Cleaner; Maintenance Schedule - Eureka AS1050 Series Owner's Manual

How to identify parts of vacuum cleaner

Hose
Air path
selector knob
READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER. Moving parts! Power switch is marked
2 Eureka Customer Service HELPLINE 1-800-282-2886
SPECIAL FEATURES
Available on some models
Handle
Turbo nozzle
(on some models)
Bag indicator
Bag compartment
Exhaust/HEPA
(located behind dust cup)
Premotor filter
Height adjustment knob
Brush roll cover

Maintenance schedule

Disposable
bag style AS
Exhaust filter
EF6
( HEPA filter on some models)
Premotor
filter
U belt
Brush roll
Dusting
Turbo cover
brush
Turbo nozzle
Power switch
Handle
release
DISPOSABLE DUST BAG, Style AS – Replace when indicator turns orange
Replace bag when green
indicator turns orange.
Lift handle
disposable dust bag.
PREMOTOR FILTER – Clean as needed to maintain suction
Pull latch to
release bottom lid.
Never use vacuum without premotor filter in place
Remove dust cup.
Upper hose retainer
Upper cord retainer
Crevice tool
Carry handle and cord wrap
Lower cord retainer
(on carry handle)
Wand
Power cord
Quick release cord wrap
Lower hose retainer
Base hose
Pull up latch
to open cover.
2
—
Line up flat edge to
and remove
install new bag.
Never use vacuum without dust bag in place
Remove filter; rinse and dry thoroughly.
To reinstall filter, push curved edge under tabs.
Close bottom lid until it clicks.
EXHAUST FILTER EF6 – Replace within 6 months
Press down tab and Lift out filter and replace. Reinstall
remove filter cover. cover and snap into place.
BRUSH ROLL – Clean monthly
U BELT – Replace worn, cut or out of shape belt
www.eureka.com
I
for ON-OFF.
1
–
Fold over hygienic flap
and tuck in.
Close cover and snap
to lock in place.