Samsung YP-T10 Service Manual page 32

4-2-2 How to recovery system
 When do you perform this procedure?: When NAND data is corrupted
 In case of non-operation key.
- Turn off the set and Restart.
- If it doesn't turn down, Press the reset button by using pointed stuff.
(The reset button is located at the back near the bottom.)
- Check the device if it operates properly.
 In case of device malfunction or serious problem.
- FW Download Method through a Program(FWDN)
Through this hard-recovery process, all data in the device will be totally deleted. You should be cautious.
1. If you use FWDN program for the first time, you should install VTC driver on your computer.
1) Before executing FWDN, execute
intall2000XP. (FWDN\Driver\install2000XP)
2) Connect YP-T10 to PC by using USB cable.
3) Execute FWDN and open ROM file.
4) Press the POWER button and the RESET
button.
You should press the RESET button
certainly with holding POWER button.
At the same time it must have been
connecting to PC by USB cable.
Samsung Electronics
Troubleshooting
4-15