Advertisement
6 Loading software
6.1
Load Plantronics software by visiting
download button.
7 Making a Test Call
7-1.
While wearing your headset, press the call control button on the headset. The USB
adapter indicator light will flash green indicating a radio link is active with the headset.
7-2.
Place a test call using your softphone or UC application.
7-3.
Adjust the receive and transmit volume to comfortable levels using the volume
control in your softphone or UC application audio set up.
You can also fine tune the listening volume on the headset. When wearing the
7-4.
headset on your right ear, push the volume button up to increase the volume and
push the volume button down to decrease the volume. The opposite is true when
wearing on left ear.
Press the volume button in to mute/unmute the call. The USB adapter indicator light
7-5.
will flash red when the headset is muted.
7-6.
To end the test call, press the call control button on the headset.
Do not use headphones / headsets at high volumes for an extended period of time. Doing so
can cause hearing loss. Always listen at moderate levels. See
more information on headsets and hearing.
Hereby, Plantronics B.V. declares that the product described in the accompanying documentation is in compliance
with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of
Conformity to the essential requirements of 1999/5/EC may be found at
6
plantronics.com/software
plantronics.com/healthandsafety
plantronics.com/documentation
and click on the
for
Advertisement
