Motorola DCX3520e-M Installation Manual page 71

Diagnostics
Field Description
(Digital channels only) The center RF carrier frequency for the digital service. It can be
Tuned
Frequency
From 54 to 860 MHz.
VCT ID Virtual Channel Table ID
SOC The Selectable Output control is enabled or disabled.
CCI The copy control information:
00 — copy free
01 — no more copies
10 — copy once
11 — never copy
N/A — the value is invalid or cannot be retrieved
APS The Analog Protection System; for example, Macrovision:
00 — no Macrovision
11 — Type 3 Macrovision
N/A — the value is invalid or cannot be retrieved
RC Flag Displays whether the broadcast flag is present:
0 — no flag/not defined
1 — the flag is present/enabled
N/A — the value is invalid or cannot be retrieved
CIT The constrained image trigger, as delivered in the PRK or the Set DRM API:
1 — set
0 — not set
N/A — the value is invalid or cannot be retrieved
DRM The digital rights management valid flag bit:
1 — set
0 — not set
N/A—the value is invalid or cannot be retrieved
RS The retention state:
Forever, 1 week, 2 days, 1 day, 12 hours, 6 hours, 3 hours, 90 minutes, or Not Defined
N/A —value is invalid or cannot be retrieved
If Switched digital video is available, the following information is related to the SDV
SDV Client
Status
Client:
•
•
•
•
•
High-Definition DVR DCX3520e-M • Installation Manual
365-095-22819-x.1
Status of client
IP Address of primary switched video manager (SVM) server
IP Address of secondary switched video manager (SVM) server
IP Address of Auto Discovery server
SDV Mode
B
64