Table of Contents
Advertisement
Appendix
Troubleshooting
Symptom
Possible Cause
Erratic
Unit not receiving
behavior.
enough power.
Keyboard
Keyboard and/or
and/or Mouse
mouse need to be
not responding.
reset.
No connection to
the computer.
KVM switch needs to
be reset.
USB devices
USB ports need to
not responding
be reset.
Keyboard Language Codes
Language
US English
French
Japanese
26
Action
Use a DC 5V power adapter if you are not
already using one. If you are already using a
power adapter, check that it matches the
system specifications (DC 5V), and that it is
plugged in and functioning properly.
Press and hold port selection switches 1 and 2
for two seconds. (CS-1734 only.)
Unplug the cable(s) from the console port(s),
then plug it/them back in.
Check the cable from the switch to the computer
to make sure it is properly connected.
Power off all devices on the installation (see the
note at the top of p. 8); power off the KVM
switch; wait five seconds; then power up.
Unplug the device's USB cable from the USB port
on the switch's rear panel, then plug it back in.
Use the USB Reset hotkey combination (see p.
16), to reset the USB ports.
Code
33
08
15
CS-1732 / CS-1734 User Manual
2003-07-17
Advertisement
Table of Contents
