Panasonic CS-XE9SKUA Service Manual page 41

12.12.1.4 Determination of Presence or Absence

Human presence status shall be determined based on the human presence status of each area.

When all area has been detected absent for more than 40 minutes then it will judge as absence.
12.12.1.5 Setting Temperature and Fan Speed Shift
ECONAVI ; Detecting human presence and activity, the unit controls room temperature to save energy.
Human
Mode
COOL/DRY
Set
temperature
HEAT
AUTO COMFORT ; Detecting human presence and activity, the unit controls room temperature to keep human
comfortable consistently.
Human
Mode
Set
COOL/DRY
temperature
HEAT
Set
Fan Speed
* During low activity, fan speed 1 tap up for first 15 minutes or until set temperature is reached.
** During human absence, maximum fan speed for COOL/DRY mode is medium fan.
12.12.1.6 ECONAVI and AUTO COMFORT Demo Mode

To enable ECO DEMO mode:

To disable ECO Demo MODE:
Transmit ECO Demo signal again.
o
Low activity Normal activity
+2°F / +1°C
Low activity Normal activity
+2°F / +1°C
+0.5°F / +0.3°C
+1 tap*
Remote control normal mode
Press continously for 5s
SET
Transmit ECO demo code and
after 30 seconds return to normal
mode.
Transmit sunlight sensor check code
and after 30 seconds return to normal
mode.
Transmit check code
and after 30 seconds return to normal
mode.
High activity Absent
-4°F / -2°C
High activity Absent
-2°F / -1°C
-4°F / -2°C
+1 tap
41
+4°F / +2°C
-4°F / -2°C
+4°F / +2°C
-4°F / -2°C