Download Print this page

Error Codes - Electrolux T4290 Operating Manual

Hide thumbs

Advertisement

16

Error codes

The dryer has automatic error indication.
Error indication is displayed as a flashing code.
Please refer to the Programming manual for Selecta Control for an explanation of error
codes.
A service technician must be contacted should an error be displayed.
The user can, however, try to correct some error codes himself.
Error code E05 or E06
When error code E05 or E06 is displayed this can be due to the motor being too hot.
Stop the dryer and wait for 5 minutes. Start again and choose a program. If this does not
help and the error code reappears a service technician must be contacted.
Error code E12
When the error code is displayed this can be due to the user having overfilled the dryer.
Remove some of the clothes, close the door, and press the start button. If this does not
help and the error code reappears a service technician must be contacted.
Error code E14. OPL laundries only
When resetting gas error E14 the dryer must be in operation on a program with heat,
and the heating indicator must be on.
The dryer must only be reset 3 times.
If the dryer, however, has to be reset more than 3 times it must be put out of order and a
service technician must be called.
Error code E15
When the error code is displayed this can be due to the user having overfilled the dryer.
Remove some of the clothes, close the door, and press the start button. If this does not
help and the error code reappears a service technician must be contacted.
Error code E16
The error code is displayed if the user presses the start button while the vacuum switch is
already closed.
Resetting by opening / closing the door and pressing start button.
Error codes

Hide quick links:

Advertisement

loading

  Related Manuals for Electrolux T4290

This manual is also suitable for:

T4650T4530T3290T3530T3650