Installing The Engine; Pivot Shaft Wrench Adapter - Yamaha 2009 YZF-R1 (Y) Service Manual

EAS23720

INSTALLING THE ENGINE

ECA14B1021
Do not hold the radiator inlet pipe when
removing the engine and moving the
engine by itself.
1. Install:
• Engine mounting adjust bolts
(temporary tighten)
2. Install:
• Engine
3. Install:
• Engine mounting bolt (rear upper side)
"1"
• Engine mounting bolt (rear lower side) "2"
• Engine mounting nut (rear upper side)
• Engine mounting nut (rear lower side)
TIP
Lubricate the upper and lower engine mount-
ing bolts threads with lithium-soap-based
grease.
4. Install:
• Engine mount collar (front left side) "1"
(Install together with damper "2".)
• Engine mounting bolt (front left side) "3"
(temporary tighten)
TIP
When installing the engine mount collar (front
left side), set the damper toward the engine.
5. Install:
• Engine mount collars (front right side) "1"
• Engine mount collar (front right side) "2"
• Engine mounting bolt (front right side) "3"
(temporary tighten)
6. Tighten:
• Engine mount adjusting bolts
Engine mount adjusting bolt
7 Nm (0.7 m·kgf, 5.1 ft·lbf)
TIP
• Use the pivot shaft wrench "1" and pivot shaft
wrench adapter "2" to tighten the engine
mounting adjust bolts.
• Make sure that surface of the engine and
bearing surfaces of the engine mounting
adjust bolts are contacting each other.
Pivot shaft wrench
90890-01471
Frame spanner socket
YM-01471

Pivot shaft wrench adapter

90890-01476
5-10
ENGINE REMOVAL