Brother FAX-2840 Basic User's Manual page 80

Error Message
Out of Memory
Print Unable XX
Replace Drum
72
Cause
The machine's memory is full.
The machine has a mechanical
problem.
It is time to replace the drum unit. Replace the drum unit.
The drum unit counter was not
reset when a new drum was
installed.
Action
Fax sending or copy operation in
process
Do one of the following:
Press Start to send or copy the scanned

pages.
 Press Stop/Exit and wait until the other
operations in progress finish, and then
try again.
 Clear the faxes from the memory.
Print the faxes that are stored in the
memory to restore the memory to 100%.
Then turn off Fax Storage to avoid
storing more faxes in the memory. (See
Advanced User's Guide: Printing a fax
from the memory and Fax Storage.)
Print operation in process
Do one of the following:
 Reduce the print resolution. (See
Software User's Guide: Basic tab)
 Clear the faxes from the memory. (See
the above explanation.)
Do one of the following:
 (For FAX-2840)
See Transferring your faxes or Fax
Journal report uu page 74 before
disconnecting the machine so you will
not lose any important messages. Then,
turn the power switch off, wait a few
seconds, and then turn it on again.
Leave the machine for 15 minutes with
the power on.
(For MFC-7290)
Turn the power switch off, wait a few
seconds, and then turn it on again.
Leave the machine for 15 minutes with
the power on.
 If the problem continues, call Brother
Customer Service.
(See Replacing the drum unit uu page 62.)
Reset the drum unit counter.
(See Resetting the drum counter
uu page 65.)