Cleaning And Care; Guarantee And Service - AEG Boomerang 10 Quick Start Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
10.2
Register Additional Handsets
• Press and hold the
>The message indicator on the base will flash for up to 1 minute, while it is in registration mode.
• On the handset, press
• Press
to "SETTINGS" and then press
• Press
to "REGISTRATION" and then press
• Enter the Master PIN and then press
Note: After entering the Master PIN,
>WAITING flashes on the screen.
>A confirmation tone is played to indicate successful registration, and the handset returns to standby
mode, with its handset number displayed.
>If no base is found with the entered PIN, error tones are played to indicate failed registration and
"PLS REG H/S" is displayed on the screen. You will need to repeat from step 1 above.
>During steps 2-5, if no key is pressed on the handset within 10 seconds, the registration procedure will
be aborted. If this happens, repeat from step 1 above.
10.3
Reset the Unit
You can reset your phone to its default settings with this feature.
Note: Upon reset, all your personal settings, call log and redial list entries will be deleted and the phone will
return to its default settings, including the Master PIN. However, your phonebook will remain unchanged
after reset and any recorded messages will remain unchanged, while all other settings will be reset.
• From the home screen, press
• Press
to "SETTINGS" and then press
• Press
to select "RESET" and then press
• Press
again to confirm.
>A confirmation tone is played and the unit is reset to its default settings.
11

CLEANING AND CARE

Do not clean any part of your unit with benzene, thinners or other solvent chemicals as this may cause
permanent damage which is not covered by the Guarantee.
When necessary, clean it with a damp cloth.
Keep your phone system away from hot, humid conditions or strong sunlight, and don't let it get wet.
12

GUARANTEE AND SERVICE

The unit is guaranteed for 24months from the date of purchase shown on your sales receipt. This guarantee
does not cover any faults or defects caused by accidents, misuse, fair wear and tear, neglect, faults on the
telephone line, lightning, tampering with the equipment, or any attempt at adjustment or repair other
than through approved agents.
Please keep your sales (till) receipt this is your proof of guarantee.
12.1
While the unit is under Guarantee
• Disconnect the base unit from the telephone line and the mains electricity supply.
• Pack up all parts of your device, using the original package.
• Return the unit to the shop where you bought it, making sure you take your sales receipt.
• Remember to include the mains adapter.
key under the base unit for approximately 5 seconds.
.
to confirm.
.
to select.
to select.
to select.
to select.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents