AEG M250 User Manual page 14

14
bottom of the battery down until it
clicks into place (2).
• Replace the back cover by placing it
flat on the back of the handset and
pushing up until it clicks into place.
1
6.2 Charge the battery
Warning:
Use only supplied/approved batteries
and chargers. Using others may be
dangerous and will invalidate approvals
or warranty. A battery must be fitted.
Do not charge with the back cover
removed.
• Connect the charger lead firmly
into the DC socket at bottom of the
handset.
• Plug the mains power adapter into
an AC mains socket. If the handset
is turned on, "Charger connected"
displays for a few seconds, and
2