Setting The Bluetooth Audio Codecs; Setting The Bluetooth Standby Mode; Turning On Or Off The Bluetooth Signal - Sony MHC-GT5D Operating Instructions Manual

Setting the BLUETOOTH
audio codecs
You can select a BLUETOOTH audio
codec from AAC or SBC. AAC can be
selected only when the BLUETOOTH
device supports AAC.
1
Press OPTIONS.
2
Press / repeatedly to select
"BT AAC," then press
3
Press / repeatedly to select
the setting, then press
• BT AAC ON: AAC is available.
• BT AAC OFF: AAC is not available
and SBC is enabled instead.
To exit the options menu, press
OPTIONS.
Notes
You can enjoy high quality sound if AAC
• •
is selected. If you cannot listen to AAC
sound from your device or the sound is
interrupted, select "BT AAC OFF."
If you change this setting while the
• •
system is connected to a BLUETOOTH
device, the BLUETOOTH device will
be disconnected. To connect to the
BLUETOOTH device, perform the
BLUETOOTH connection again.
56
GB
Setting the BLUETOOTH
standby mode
The BLUETOOTH standby mode
enables the system to turn on
automatically when you establish
the BLUETOOTH connection with a
BLUETOOTH device.
1
Press OPTIONS.
2
Press / repeatedly to select
.
"BT STBY," then press
3
Press / repeatedly to select
.
the setting, then press
• ON: The system turns on
• OFF: Turns off this function.
To exit the options menu, press
OPTIONS.
Turning on or off the
BLUETOOTH signal
You can connect to the system
from a paired BLUETOOTH device
in all functions when the system's
BLUETOOTH signal is set to on. The
BLUETOOTH signal is turned on by
default.
Use the buttons on the subwoofer to
perform this operation.
Hold down ENTER and
about 3 seconds.
"BT ON" or "BT OFF" appears on the
display.
automatically even when the
system is in standby mode.
.
.
+ for