Download Print this page

Storage Recommendations; Operation - DeWalt DCR018 Instruction Manual

Heavy-duty compact work site radio
Hide thumbs

Advertisement

Table of Contents
6. Foreign materials of a conductive nature such as, but not limited
to, grinding dust, metal chips, steel wool, aluminum foil, or any
buildup of metallic particles should be kept away from charger
cavities. Always unplug the charger from the power supply when
there is no battery pack in the cavity. Unplug the charger before
attempting to clean.
7. Do not freeze or immerse the charger in water or any other liquid.
WARNING: Shock hazard. Don't allow any liquid to get inside the
charger. Electric shock may result.
WARNING: Burn hazard. Do not submerge the battery pack in any
liquid or allow any liquid to enter the battery pack. Never attempt to
open the battery pack for any reason. If the plastic housing of the
battery pack breaks or cracks, return to a service center for recycling.

Storage Recommendations

1. The best storage place is one that is cool and dry, away from
direct sunlight and excess heat or cold.
2. For long storage, it is recommended to store a fully charged
battery pack in a cool dry place out of the charger for optimal
results.
NOTE: Battery packs should not be stored completely depleted of
charge. The battery pack will need to be recharged before use.
SAVE THESE INSTRUCTIONS
FOR FUTURE USE
COMPONENTS (FIG. 2)
A. ON/OFF button
B. Volume knob
C. Antenna
D. Hang holes
E. Seek/tuner/arrow buttons
F. Mode button
G. Clock button
H. Preset button
I. LCD display
FIG. 2
D

OPERATION

WARNING: To reduce the risk of injury, turn unit off and
disconnect it from power source before installing and removing
accessories, before adjusting or when making repairs.
Installing and Removing the Battery Pack
(Fig. 3)
NOTE: For best results, make sure your battery pack is fully charged.
To install the battery pack (J), insert the slide pack or tower stem into
battery receptical until the battery pack is firmly seated. For the stem
pack, be sure that the battery latches are engaged. Refer to Figure 3.
To remove battery pack from the radio, firmly pull up or out depending
on the battery type. For the stem pack, press the battery release
buttons before pulling firmly. Insert it into the charger as described in
the charger section of this manual.
8
C
B
A
E
G
H
I
E
F

Hide quick links:

Advertisement

Table of Contents
loading

  Also See for DeWalt DCR018

  Related Manuals for DeWalt DCR018