Power Consumption - Acer V193 Service Manual

Power Consumption

The monitor is equipped with a power-management according to the below.
There is a delay of 5s ... 7s before the transition from On-state to any power saving state to avoid
unintentionally entering of a power saving stage during display resolution and timing mode changes.
Transition from any power saving state to another can be instantaneous.
The recovery from Off-state requires no manual power on.
Mode
Power-On
DPMS off
DC Switch-off
SYNC. On means: Normal operation
SYNC. Off means:
CONNECTORS / CONTROLS
Connectors
-
Power
-
Analog RGB
Pin – Assignment of 15-pin D-sub:
1 Red Video
2 Green Video
3 Blue Video
4 Serial Clock for ISP
5 Ground
6 Red Ground
7 Green Ground
8 Blue Ground
- Audio
Monitor Control Keys
KEY :
Position Of Controls
Position of all switches
Position of LED
H-Sync. V-Sync.
on on
off off
H sync. F < 10KHz duty cycle > 25%
V sync. F < 10Hz
: Monitor rear side
: Monitor rear side / Data Cable
: Monitor rear side
-PC I/P for PC
Power , Menu , Adjust +/- , Vol +/-, Auto
Video Pw-cons.
active < 40W
blanked < 2 W
< 1 W
duty cycle > 25%
9 +5V FOR DDC
10 Detect
11 Serial Data for ISP
12 Serial Data for DDC
13 H-Sync.
14 V-Sync.
15 Serial Clock for DDC
: Bottom side of front bezel
: Bottom side of front bezel
- 30 -
Indicator Rec. time*
Blue LED --
Orange LED < 5S
Dark LED
: AC Inlet
: 15-pin D-sub female / male
:
: 3.5mm Stereo female