D-Link DSL-2870B User Manual page 66

Hide thumbs Also See for DSL-2870B:
Table of Contents

Advertisement

D-Link DSL-2870B Dual Band Wireless N750 Gigabit VDSL2+/ADSL2+ Modem Router User Manual
Filter Type
In this section, we can configure the Filter Type. Options to choose from are
IP Filters and MAC Filters.
IP Filter Type
In this section, we can configure the IP Filter Type. Options to choose from
are IPv4 Filter and IPv6 Filter.
Add Filter
In this section, we can configure the following parameters.
Enable IP Filters: Select this option to enable or disable the IP filters
option.
Name: Enter the name here.
Protocol: Select the protocol used here. Options to choose from are Any,
TCP, UDP and ICMP.
Source IP Address: Select the source IP address used here. Options of
the interface to choose from are LAN1, LAN2, LAN3 and LAN4
options to choose from are Any IP address, Single IP and Specify IP
Address (Range) IP Address
IP Address: Enter the IP address for the filter.
Destination IP Address: Configure the destination IP address here. Enter
the Destination IP Address in from and to
Destination Ports: Configure the destination ports here.
Time: Select this option to enable or disable the time option.
Begin Time: Enter the begin time here.
End Time: Enter the end time here.
Begin Day: Enter the begin day here.
End Day: Enter the end day here
Click the Apply button to accept the changes made.
Page 66

Advertisement

Table of Contents
loading

Table of Contents