7. Insert a feeler gauge between the cam lobe
and the lifter (Figure 67). The clearance is
measured correctly when the feeler gauge drags
slightly when it it inserted and withdrawn.
Repeat for all valves, turning the crankshaft
clockwise. Record the measurements and
Thecylrnders are numbered I through 4,
startlng at the It$ side of the engine.
Intake valves are at the rear of the
engrne: exhaust valves are at the front.
8. If any valve's clearance is not within the
range specified in Table
skip ahead to Valve
Clearance Adjustment. I f all t h e valve
clearances are within specification, continue
Property of www.SmallEngineDiscount.com - Not for Resale