Download  Print this page

Advertisement

Table of Contents
1982 AND LATER SERVICE INFORMATION
305
6. Check the bushings at the top and bottom
of the shock absorber. Replace if worn,
cracked, hardened or otherwise damaged.
7. Lubricate the outer surface of the sleeves,
the needle bearings and the spherical bearings
with molybdenum disulfide grease.
8. Assemble the suspension parts; tighten all
fasteners to specifications in Table 25.
UNI-TRAK REAR SUSPENSION
(ZX550-A1 AND A2)
Shock Absorber
Removal/Installation
A.
Swing arm pivot shaft nut
Refer to Figure 100 for this procedure.
REAR SHOCK ABSORBER
(ZXSSO-A1 AND A2)
1. Bolt
2. Bushing
3. Shock absorber
4. Nut
5. Bolt
6. Spacer
5
7. Control link
8. Bearing
9. Washer
10. Bolt
11. Bolt
12. Bearing
13. Control link
14. Washer
15. Bolt
16. Bolt
17. Washer
18. Bearing
19. Rocker arm
20. Spacer
21. Dust seal
22. Bearing
23. Spacer
24. Washer
25. Bushing
26. Bushing
Property of www.SmallEngineDiscount.com - Not for Resale

Advertisement

Table of Contents

   Also See for Kawasaki KZ500

This manual is also suitable for:

Zx550Kz550Kzx550

Comments to this Manuals

Symbols: 0
Latest comments: