REAR SHOCK ABSORBERS
This model is equipped with 4-way,
damping adjustable air shocks. Both shock
absorber air chambers are connected by a
single air hose; thus both shocks are under
equal pressure at all times. A single air fitting
is mounted on the left-hand shock absorber.
See Figure 92.
1. Place the bike on the centerstand so that
the rear wheel clears the ground.
2. Remove the air valve cap and depress the
valve stem to release all air pressure from
both shock absorbers.
2. Swivel nut
4. Male pipe
6. Air valve
8. Dust boot
9. Shock unit
11. Hose clamp
Property of www.SmallEngineDiscount.com - Not for Resale