Download  Print this page

Advertisement

Table of Contents
1982 AND LATER SERVICE INFORMATION
255
6. Rev the engine once and let it return to
idle; check that all cylinders return to equal
readings. Readjust, if necessary. Tighten the
locknuts while holding the adjuster screws
securely.
Recheck
the
readings
after
tightening the locknuts to make sure the
adjusters didn't move; repeat the procedure if
necessary.
7. Reset the idle speed (Figure 19), stop the
engine and install the vacuum lines and caps.
8. Install the fuel tank as described in
Chapter Seven of the main book.
Table 1 MODEL YEARlSUFFlX DESIGNATION
KZ550-A3 (Standard)
KZ550-Fl (Spectre)
KZ55O-B4 (European)
KZ550-F2 (LTD)
KZ550-C3 (LTD)
KZ550-MI (LTD Special)
Table 2 STANDARD FORK OIL*
Model
Dry Capacity
Wet Capacity
Oil Level
U.S. fl. oz. (CC)
U.S. fl. oz. (CC)
in. (mm)
* Fork oil level is checked with forks fully extended and the fork spring removed. Use oil grade SAE 5W-20.
"
Not specified.
Table 3 FORK AIR PRESSURE*
Standard
Range
I
KZ550
F1, M i
7.5 psi (59 kPa)
7-10 psi (49-69 kPa)
H 1
10.0 psi (70 kPa)
8.5-11 psi (60-80 kPa)
2x550-A1, A2
10.0 psi (70 kPa)
8.5-11 psi (60-80 kPa)
\
'
Never exceed 36 psi (245 kPa) air pressure as it will damage the oil seals.
I
Property of www.SmallEngineDiscount.com - Not for Resale

Advertisement

Table of Contents

   Also See for Kawasaki KZ500

This manual is also suitable for:

Zx550Kz550Kzx550

Comments to this Manuals

Symbols: 0
Latest comments: