Download  Print this page

Advertisement

Table of Contents
188
CHAPTER EIGHT
Headlight Replacement
(KZ550-D)
1. Remove the fairing; see Faiung Rernoval in
Chapter Ten.
2. Remove the mounting screw a t each
bottom corner of the headlight housing.
3.
Swing the trim bezel and headlight unit out
and remove the electrical connector from the
backside.
4. Remove the dust cover from the back ofthe
light housing. push and turn the bulb stop to
the left (counterclockwise) and remove the
lighting element. Install a new element.
CA
U T I O N
Use a clean cloth t o grasp the quartz
bulb. Don't handle a quartz bulb with
your bare fingers or a dirty rag. They'll
learxe oil on the bulb a n d w i l l cause it t o
burn out ear1.v.
5. T o assemble, reverse this procedure. Adjust
the headlight as described under Headlight
l-ld~wrrnent in this chapter.
Headlight Replacement
(Sealed Beam Models)
1. Remove the mounting screw (Figure 45) on
each side of the headlight housing.
2. Pull the trim bezel and headlight unit out
and remove the electrical connector from the
backside.
3. Remove the top and bottom pivot screws
(A. Figure 47) and the horizontal adjusting
screw (B). Take off the outer rim.
4. Remove the 2 screws from the inner rim
and remove the sealed beam unit.
5. When installing a new sealed beam unit, be
sure the "TOP" mark faces up.
Property of www.SmallEngineDiscount.com - Not for Resale

Advertisement

Table of Contents

   Also See for Kawasaki KZ500

This manual is also suitable for:

Zx550Kz550Kzx550

Comments to this Manuals

Symbols: 0
Latest comments: