Pairing The Sensors - Pioneer SGX-CA500 Quick Start Manual

Hide thumbs Also See for SGX-CA500:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
2
Tap [Date & Time] and set the
date and the time.
Press and hold the [MENU] button
after you've completed your settings.
Time Zone Select a time zone.
Date
Enter the date.
Time
Enter the time.
24-Hour
Check the box to display time
Format
in 24 hour format.
Date
Select the date format.
Format
3
Tap [Close].
The Initial Setup is finished and
CycloMeter starts.

Pairing the Sensors

Pair the SGY-PM910H/PM900H
Pedaling Monitor Sensor or other ANT+
sensors to the device.
Before pairing the sensors
Make sure that the sensors that you
want to pair are activated.
If more than one sensor is activated,
bring the device close to the sensor
or specify the device number to pair.
Refer to the User's Guide for
information about how to specify the
device number.
If you use the speed sensor
sold separately and the wheel
circumference is different from the
default, set the wheel circumference.
The wheel circumference is set to
2096 mm by default. For details,
refer to the Users Guide.
EN
Basic Operation
17

Advertisement

Table of Contents
loading

Table of Contents