Sensor Settings; Sensor On/Off; Checking Sensor Information - Pioneer SGX-CA500 User Manual

Hide thumbs Also See for SGX-CA500:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

Sensor Settings

EN

Sensor On/Off

Use the procedure below to turn sensors connected to the
bike on or off.
1
On the home screen, tap the [Sensors] icon.
This displays the sensor list.
2
Tap a sensor check box to toggle it between on
and off.
A sensor connection is turned on if its check box is
selected.
You can check information about a sensor by tapping its
sensor name.
Sensor settings need to be configured for each bike. If this
device has multiple bikes registered, you need to configure
sensor settings for each of the registered bikes.
Ü Bike Select (page 44)
50

Checking Sensor Information

Use the procedure below to check connected sensor device
information and to check the status of a sensor.
1
On the home screen, tap the [Sensors] icon.
This displays the sensor list.
2
Tap the sensor you want to check.
This displays sensor information.
Setting Item
Device Number
Shows the sensor device number.
Manufacturer
Shows the sensor manufacturer ID.
Number
It is not shown for a speed & cadence
sensor.
Error Rate
Shows the error rate of data received from
the sensor.
OK:
It is receiving the data properly from the
sensor.
Not connected:
Sensor connection is disabled.
Processing...:
Sensor connection is enabled and the
device is searching for the sensor.
Battery
Shows the sensor battery voltage when the
sensor is connected.
It is shown only for PowerMeter, Pedaling
Monitor L, or Pedaling Monitor R.
Delete
Tap to delete the sensor from the sensor
list.
Description

Advertisement

Table of Contents
loading

Table of Contents