Ripping - Samsung BD-J7500 User Manual

Media Play
4. Repeat Step 3 to select and check additional
tracks.
5. To remove a track from the list, move to the
track, and then press the E button again.
The check on the track is removed.
6. When done, press the ▲▼ button to select
Play, and then press the E button. The
Music Playback screen reappears listing only
the tracks you checked. The selected tracks
play automatically.
| NOTES |
\ You can create a playlist with up to 99 tracks on Audio
CDs (CD-DA).
\ On the Selection Play screen, you can also choose Select
All, Clear All, and Cancel.
- Use Select All to select all tracks. This cancels
your individual track selections. When you press the
RETURN button on your remote control or select the
Play button, and then press the E button, all tracks
will appear on the Music Playback screen, and the
product will begin to play all tracks from Track 001.
- Use Clear All to deselect all selected tracks at once.
Then, select individual tracks or use Select All to
select all the tracks, and then press the RETURN
button on your remote control. If you do not use Select
All or select individual tracks, the Playlist will not
change.
- Cancel cancels any changes you made on the Play
Select screen. When you return to the Playback screen,
the Playlist will be unchanged.

Ripping

1. Insert a USB device into the USB jack on the
front of the product.
2. With the Playback screen displayed, select
and then press the E button. The
the
Settings menu appears.
3. Use the ▲▼ buttons to select Ripping, and
then press the E button.
4. Use the ▲▼ buttons to select a track, and
then press the E button. A check appears
to the left of the track.
5. Repeat Step 4 to select and check additional
tracks.
6. To remove a track from the list, move to the
track, and then press the E button again.
The check on the track is removed.
7. When done, select the Rip using the ▲▼
buttons, and then press the E button. The
Rip pop-up appears.
8. Use the ▲▼ buttons to select the device to
store the ripped files to, and then press the
E button.
| NOTE |
\ Do not disconnect the device while ripping is in progress.
If you want to cancel ripping, press the E
9.
button and then select Yes. Select No to
continue ripping.
10. When ripping is complete, the "Successfully
Ripped." message appears. Press the E
button.
11. Press the RETURN button or select Cancel,
and then press the E button to go back to
the Playback screen.
| NOTES |
\ This function does not work with DTS Audio CDs.
\ This function may not be supported by some discs.
\ Ripping encodes music into the .mp3 format at 192kbps.
\ On the Ripping screen, you can also choose Select All
and Clear All.
\ Use Select All to select all tracks and press the E
button. This cancels your individual track selections.
\ Use Clear All to deselect all selected tracks at once.
36
English