Appendix; Additional Information; Notes - Samsung BD-J7500 User Manual

Appendix

Additional Information

Notes

3D Settings
• For some 3D discs, to stop a movie during 3D playback, press the 5 (STOP) button once.
• Depending on the content and the position of the picture on your TV screen, you may see vertical
TV Aspect Ratio
• Depending on the disc type, some aspect ratios may not be available.
• If you select an aspect ratio and option that is different than the aspect ratio of your TV screen,
• If you select the 16:9 Original, your TV may display 4:3 Pillarbox (black bars on the sides of the
BD Wise (Samsung Products only)
• When BD Wise is On, the Resolution setting automatically defaults to BD Wise and BD Wise
• If the product is connected to a device that does not support BD Wise, you cannot use the BD
Settings
• For the proper operation of BD Wise, set the BD Wise option of both the product and the TV to On.
Digital Output
• Be sure to select the correct Digital Output or you will hear no sound or just loud noise.
• If the HDMI device (AV receiver, TV) is not compatible with compressed formats (Dolby Digital,
• Regular DVDs do not have BONUSVIEW audio and Navigation Sound Effects.
• Some Blu-ray Discs do not have BONUSVIEW audio and Navigation Sound Effects.
• The Digital Output setup does not affect the HDMI audio output to your TV.
• If you play MPEG audio soundtracks, the audio signal outputs as PCM regardless of your Digital
PCM Downsampling
• Even when PCM Downsampling is set to Off, some discs will only output downsampled audio
• HDMI
The movie stops and the 3D mode option is de-activated.
To change a 3D option selection when you are playing a 3D movie, press the 5 (STOP) button
once. The Home Screen menu appears. Press the 5 (STOP) button again, then select 3D
Settings in the Blu-ray menu.
black bars on the left side, right side, or both sides.
the picture might appear to be distorted.
picture).
appears in the Resolution menu.
Wise function.
DTS), the audio signal outputs as PCM.
It affects the optical and HDMI audio output when your product is connected to an AV receiver.
Output selections (PCM or Bitstream).
through the optical digital output.
- If your TV is not compatible with compressed multi-channel formats (Dolby Digital, DTS), the
product may output PCM 2ch downmixed audio even though you selected Bitstream (either
Reencoded or Unprocessed) in the setup menu.
- If your TV is not compatible with PCM sampling rates over 48kHz, the product will output at
48kHz.
47
English