Get Started; Install Filters - Philips AC4012 User Manual
Hide thumbs
Also See for AC4012:
- User manual (100 pages) ,
- Quick start manual (6 pages) ,
- User manual (22 pages)
Table of Contents
Advertisement
Available languages
Available languages
3 Get started
Install filters
The air purifier comes with all filters fitted
inside, but you have to remove the packaging
of the filters before you can use it. Remove all
filters, unpack them, and place them back into
the air purifier as described below.
Tip
•
When you remove or insert filters, place the
purifier against a wall for more stability.
Note
•
Insert the filters in the correct position.
•
Make sure you place the filters in the order of
HEPA filter, activated carbon filter, and finally the
pre-filter.
•
Make sure that the side with the tag is pointing
towards you.
1
Place your fingers in the recesses of the
side panels and gently pull the top part of
the front panel towards you.
2
Gently pull the bottom of the panel out
(1), then lift the top part of the front panel
towards you (2).
2
1
3
Remove all the filters from the purifier.
4
Remove all packaging material from the
filters.
5
Put the filters back into the purifier.
6
Place the pre-filer in the purifier.
EN
Page 7
Hide quick links:
Advertisement
Chapters
Table of Contents
