Error Code [6842] - Mitsubishi Electric PUHY-P200 Service Handbook

[7-8 Error Code Definitions and Solutions: Codes [6000 - 6999] ]
7-8-22

Error Code [6842]

1. Error code definition
A control communication transmission/reception hardware trouble
2. Error definition and error detection method
Indoor/outdoor unit communication error (Transmitting error)
Abnormal if "1" receiving is detected 30 times continuously though indoor controller board has transmitted "0".
3. Cause, check method and remedy
(1) Defective transmitting receiving circuit of indoor controller board
(2) Noise has entered into power supply.
(3) Noise has entered into outdoor control wire.
HWE14040
Cause
- 223 -
Check method and remedy
Turn the power off, and on again to check. If
abnormality generates again, replace indoor
controller board.
GB