Assembly And Disassembly Procedures - Acer RA19WAANU Service Manual

ACER X193HQ
12
Go to cover page
4.1 Assembly procedures:
Connect the cable between power board(P802)
S1
and interface board (P301)
Connect the function key cable into interface
board(P304)
Connect the FFC cable into interface board
P304
P301
FFC
Use a Phillips-head screwdriver screwed the
S2
No.1~4 screws till that power board and bracket
chassis base firmly attached.(No1~3 screw
size=M3x6; No4 screw size=M4x8;
Torque=9~10KGFxCM).
1
3
Use a Phillips-head screwdriver screwed the
S3
No.1~2 screws till that interface board and bracket
chassis base firmly attached.
(No1~2 screw size=M3x6; Torque=9~10KGFxCM).
2

4. Assembly and Disassembly Procedures

P802
2
4
1
Take the key function cable out from the hole
S4
shown as photo
Fix the function key cable with a PVC tape
Turn the monitor faced down and put it on the
S5
bracket chassis module till both parts firmly
Connect FFC cable to LCD panel. There are
two locks over here when plugging in should
be noticed
Plug in parallel direction
Angel < 5 degrees