A-S2100
When checking the P.C.B.:
•
Put the rubber sheet and cloth over this unit. Then
place the P.C.B. slantingly on the cloth and check it.
(Fig. 8)
•
Connect the front panel unit, heatsink unit L and
heatsink unit R to the chassis with a ground lead or
the like. (Fig. 8)
•
Reconnect all cables (connectors) that have been
disconnected.
•
When connecting the flexible flat cable, be careful with
polarity.
•
It is also possible to check the power unit, heatsink
unit L and heatsink unit R from the bottom.
Ground lead
アース線
Heatsink unit L
ヒー トシンクユニッ ト L
Rubber sheet and cloth
18
ゴムシー トと布
Chassis
シャーシ
P.C.B. をチェックをする場合には:
・ 本機の上にゴムシートと布を敷き、その上に P.C.B. を
斜めに置いてチェックします。 (Fig. 8)
・ フロントパネルユニットとヒートシンクユニット L、
ヒートシンクユニット R をリード線等でシャーシに
接続してください。 (Fig. 8)
・ 外したケーブル(コネクター)をすべて接続します。
・ フラットケーブルを接続する際、極性に注意してく
ださい。
・ パワーユニット、ヒートシンクユニット L、ヒート
シンクユニット R は底面からチェックすることもで
きます。
Heatsink unit R
ヒー トシンクユニッ ト R
Front panel unit
フロン トパネルユニッ ト
Fig. 8
Ground lead
アース線