Alpha SolarSmart 90 User Instruction

Pre-heat drain back solar system and wall mounted unvented hot water solar cylinder for use with an alpha combination boiler
Hide thumbs Also See for SolarSmart 90:

Advertisement

User's
Instructions
Alpha SolarSmart 90
Pre-Heat Drain Back Solar System and Wall Mounted
Unvented Hot Water Solar Cylinder
for use with an Alpha Combination Boiler
For Technical help or for Service call ...
ALPHA HELPLINE
Tel: 0870 3001964
Nepicar House, London Road,
Wrotham Heath, Sevenoaks,
Kent TN15 7RS
Leave these instructions with the User

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SolarSmart 90 and is the answer not in the manual?

Questions and answers

Summary of Contents for Alpha SolarSmart 90

  • Page 1 Instructions Alpha SolarSmart 90 Pre-Heat Drain Back Solar System and Wall Mounted Unvented Hot Water Solar Cylinder for use with an Alpha Combination Boiler For Technical help or for Service call ... ALPHA HELPLINE Tel: 0870 3001964 Nepicar House, London Road,...
  • Page 2: User Controls

    Alpha Solar valve which is supplied with the system. The SolarSmart 90 system consists of a 90 litre cylinder, a 2.5 m² flat plate drain back solar collector, drain back unit, unvented kit and solar valve. The 90 litre unvented cylinder is fitted with a pump, control box and temperature sensors. The drain back unit is fitted with a heat exchanger and pump.
  • Page 3: System Operation

    MUST always be set at maximum (No.9). Fig. 2 - Alpha combination boiler controls POSITIONING OF THE COLLECTOR The solar energy supplied by a system varies with the orientation and tilt of the collector, which will usually be determined by the existing roof.
  • Page 4: Electrical Supply

    To maintain efficient and safe operation of the SolarSmart system, it is recommended regular inspection and checks are carried out. If you contact the Alpha Helpline (Tel: 0870 3001964) for advice, you will be asked for the serial number of your solar cylinder. The serial number of the cylinder is located on top of the front housing underneath the top cover.

Table of Contents