Frequently Asked Questions; Fault Messages - Miele PT 8257 WP Operating And Installation Instructions

Frequently asked questions

Fault messages

,
Repairs to electrical, gas or steam appliances
should only be carried out by a Miele authorized
technician in accordance with local and national
safety regulations. Unauthorized repairs could
cause injury or machine damage. The
manufacturer cannot be held responsible for
unauthorized work.
After turning the machine on at the mains or if the
program list was selected the control carries out a
system analysis. All modules and their sensors, data
from the operating system, drying programs and
languages are checked.
If an error occurred in a program or language, they
are marked with § and can not be selected (here "3
Cottons Hot Wash 0%" and "English").
1 White Cottons
2 Cottons
3 Colors
Settings
Language
If an error occurs in an already selected language the
following will show:
Data fault
§
Limited function.
Language defect.
24
0%
0%
0%
§
f
Back <-
Deutsch
English §
FC A
f
Faults that occur before or after the start of a program
will flash in the display.
If the following error messages cannot be fixed with
five restarts, a general message will show:
System fault
§
Contact Technical Service
if restart w/o success.
If the display remains off, the dryer has no power.
^ Check the plug, the main switch and the fuses
on-site.
Fan fault
§
Program stop. Press Start.
Motor temperature too high.
^ Allow motor to cool.
Machine fault
§
Contact Technical Service
if restart does not work.
^ Contact Technical Service.
Drive motor fault
m
Program stopped. Press Start. Motor
overheated due to overloading.
Allow motor to cool.
f
f
f
f