1.Introduction Thank you for choosing Q9 v3.0. Quikcell Q9 v3.0 Bluetooth Headset allows you to make or receive handsfree calls. Please read this user manual carefully before using the headset. You might also need to read the manual of your phone, which provides important information of operation and safety.
4.Operating Instructions 4.1General Operations: Press and hold MFB (Multi-function Button) for 4 seconds, when LED start Turn on the headset blinking. You can hear a voice prompt “ ower is on” At the first time of use, you have the option to select a language for voice prompts after the device is powered on.
Entering pairing mode After paired,the voice prompt“phone one/two connected”. Press MFB to answer an incoming call. Answer a call Voice prompt: “Incoming call - phone one/two”. Press and hold MFB for 2 seconds and Reject a call you will hear a 'beep'.Voice prompt: “call terminated - phone one/two”.
If the connection between the phone and headset is lost, tap the Multi-function Button (MFB) on the headset to reconnect. If headset has not been paired to your phone before, follow the Voice prompt from the device or the steps below: Turn on your phone and ensure its Bluetooth function is activated.
other end to the charging jack on side of Q9 (USB Charger). While being charged, the LED indicator of your headset remains red. When the charging is complete, the LED becomes blue. You must only use the charger that is included. You must recharge the Headset if it has not been used for more than 12 months.
7.Notice FCC Information This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. European CE Notice The Bluetooth Headset is in conformity with the following essential requirement of Council Directive 1999/5/EC (refer...
Page 11
A $6.95 Shipping and Handling Fee will apply in order for Alpha Comm Enterprises, Inc. To ship out a new/refurbished product to customer. Alpha Comm Enterprises, Inc. will not assume any responsibility for any loss or damage incurred in shipping.
Need help?
Do you have a question about the QUIKCELL Q9 and is the answer not in the manual?
Questions and answers