Scangear (Scanner Driver) Does Not Start - Canon MG3500 Series Troubleshooting Manual

ScanGear (Scanner Driver) Does Not Start

Check 1: Make sure that MP Drivers is installed.
If not installed, install MP Drivers from the Setup CD-ROM or the web page.
Check 2: Select your scanner or printer on the application's
menu.
Important
If your scanner or printer name is displayed multiple times, select the one that does not
include WIA.
Note
The operation may differ depending on the application.
Use the WIA driver when scanning from a WIA-compliant application.
Scanning with WIA Driver
Check 3: Make sure that the application supports TWAIN.
You cannot start ScanGear (scanner driver) from applications not supporting TWAIN.
Check 4: Scan and save images with IJ Scan Utility and open
the files in your application.
61