Table of Contents
Advertisement
Available languages
Available languages
Creating Your Own
Program (Program Play)
You can pick out the tracks that you like and
specify the playback order in a program
containing up to 32 tracks (or 999 min. 59 sec.
in total program time)
1
Press PROGRAM on the remote in stop
mode.
“PROGRAM” appears in the display.
When you operate on the player, press
PLAY MODE repeatedly until
“PROGRAM” appears in the display.
2
Press the number buttons to enter the
track number.
If you entered the wrong track number
Press CLEAR to erase the track number and
reenter the correct track number using the
number buttons.
To select a track number over 11
Press >10 (page 14).
When you operate on the player, turn
lAMSL until the track you want
appears and push lAMSL to select
the track.
3
Repeat step 2 to enter other tracks.
Each time you enter a track number, the
total program time appears in the display.
4
Press H.
Program Play starts.
GB
To resume normal play
Press CONTINUE on the remote.
When you operate on the player, press PLAY
MODE repeatedly until “PROGRAM”
disappears from the display.
z The program remains even after
Program Play ends
Press H to play from the beginning of the program
again.
The program remains even if you stop play.
Note
If you turn off the player, disconnect the mains lead,
or press A OPEN/CLOSE, the program will be
erased.
Checking the contents of the
program
Before you start playing or while the
player is playing, press CHECK.
Each time you press the button, the track
numbers will appear in the display in the
programmed order.
When you press CHECK while the player is
playing, the track number appears from the
next track numbers of the current playing track
number.
Page 18
Advertisement
Chapters
Table of Contents
