Sony MHC-VX3 Operating Instructions Manual page 6

Step 1: Hooking up the system
(continued)
4
Set SYSTEM SELECT (color system)
to the appropriate position (PAL or
NTSC), according to your TV.
SYSTEM SELECT
If your TV automatically changes the
color system according to the input
signal:
The factory setting (AUTO) automatically
changes the color system of the video output
according to the color system of the current
VIDEO CD.
If the color system of your TV is NTSC:
Set SYSTEM SELECT to NTSC.
Pictures recorded in the PAL color system will be
stretched vertically and will be displayed with the
upper and lower parts of the picture cut off.
If the color system of your TV is PAL:
Set SYSTEM SELECT to PAL.
Pictures recorded in the NTSC color system will be
stretched horizontally and will be displayed with
the upper and lower parts of the screen masked in
black.
Note
Be sure to turn off the system before changing the
SYSTEM SELECT setting.
6
NTSC PAL
AUTO
5
For models with a voltage selector,
set VOLTAGE SELECTOR to
position of your local power line
voltage.
VOLTAGE SELECTOR
220/240V
110/120V
6 Connect the power cord to a wall
outlet.
The demonstration appears in the
display. When you press
system turns on and the demonstration
automatically ends.
If the supplied adaptor on the plug does
not fit your wall outlet, detach it from
the plug (only for model equipped with
an adaptor).
To connect optional components
See page 48.
To deactivate the demonstration
When you set the time (see "Step 2: Setting
the time"), the demonstration is deactivated.
To activate/deactivate the demonstration
again, press DEMO (STANDBY) while the
system is off.
, the