Kenmore 790.4661 Use & Care Manual page 20

Setting Oven Controls (con't)
Setting Temperature Display — Fahrenheit or Celsius:
The BROIL B and FLEX CLEAN
ROIL
oven control can be programmed to display temperatures in Fahrenheit or Celsius. The oven has been preset at the
factory to display in Fahrenheit.
INSTRUCTIONS
To change display from Fahrenheit to Celsius or
Celsius to Fahrenheit
1. To tell if the display is set for Fahrenheit or Celsius press
B (Figure 1) and hold for 7 seconds; "550°" will appear and
ROIL
"BROIL" will flash in the display and a beep will sound. If "F"
appears, the display is set to show temperatures in Fahrenheit
(Figure 2). If "C" appears, the display is set to show
temperatures in Celsius (Figure 3).
F
LEX
2. Press to switch between Fahrenheit or Celsius display
C
LEAN
modes. The display will show either "F" (Figure 2) or "C"
(Figure 3).
3. Press S to accept the change or press
TART
change.
F
LEX
pads control the Fahrenheit or Celsius temperature display modes. The
C
LEAN
S
TOP
to reject the
C
LEAR
20
PRESS
B
ROIL
for 7 seconds
F
LEX
C
LEAN
S
TOP
S or
TART
C
LEAR
DISPLAY
Figure 1
Figure 2
Figure 3