Set Preference Keys - ELNA EXPRESSIVE 820 Instruction Manual

Built-in Designs
Hoop Size A(F): 126
1
5
Mode
Screen Contrast
1
5
2
Eco Mode
10
min
3
inch/mm
4
Register
(6)
1/14
1 10 mm
X
2 3 4
6 7 8
+
+
inch mm
5

SET Preference Keys

These functions can be set according to your
preferences: screen contrast, sound volume, eco
mode, inch/mm, adjust key position, set maximum
embroidery speed, sewing light, thread selection,
format and language.
A Z
Touch the "Mode" key.
Touch the "SET" preference key to access and
personalize the machine settings.
1. Screen contrast
The LCD touch screen has an adjustable
backlight so the contrast can be lightened or
darkened. Touch the "+" key to darken and the
"–" key to lighten.
2. Sound
The beep volume default setting is 5 but it can
be adjusted between 0 (off) and 10 (loud).
Touch the "+" key to increase and the "–" key
to decrease or turn off.
3. Eco Mode
After turning on the machine this energy
saving feature will darken the LCD touch
screen and turn off the sewing light if the
machine has not been used. Simply touch the
SET
LCD screen for the screen and light to turn
back on. The eco mode default setting is 10
minutes but it can be adjusted between 1 and
30 minutes. Touch the "+" key to increase and
the "–" key to decrease. If you want to turn off
the eco mode, touch the "+" key until "OFF"
appears in the display.
4. Inch/millimeter
Choose to have the measuring unit for designs
readout in either inch or millimeters. The
default unit setting is millimeters. Touch either
the "inch" or "mm" key.
5. Touch the "Next" key.
NOTE: Any change in the set preference window
must be "registered" to be activated. Only touch
the "Register" key (6) after making all changes
desired.
22