Instruction Manual; Contents; Direct Code Set Up - One for All URC-7140 Manual Instructions

1
2
3
Select the
corresponding
device e.g. TV
4
Enter the 1st code listed for your
device type & brand (e.g. TV
Hitachi = 1576)
5
Congratulations! You should now be able to switch your device back ON
and control your device successfully.
8

Instruction manual

Direct Code Set Up

3 sec.
< select >
Press POWER.
Find the code for your device in the Code list
(page 92 - 105). Codes are listed by device type
and brand name. The most popular code is
listed first. Make sure your device
is switched on (not on standby).
--> The
then Switch off.
If your device does NOT switch off?
--> Please repeat steps 1 - 5 trying
the next code listed for your
brand.
If NOT successful?
--> Try the Search Method.
twice and
OFF
=
Ready
WWW ONEFORALL COM
x2