Recording to a tape
–– CD Synchro Recording/High Speed Dubbing/Recording Manually/
You can record from a CD, tape, or radio. You can use TYPE I (normal) or TYPE II (CrO
The recording level is adjusted automatically.
Recording from a CD
(CD Synchro Recording)
Insert a recordable tape into deck B.
repeatedly until "CD"
Insert the CD you want to
Press CD SYNC.
DECK B stands by for recording.
To reduce the hiss noise in low-level high frequency signals, press DOLBY NR so that
"DOLBY NR B" appears in the display (except when recording from a tape).
Press DIRECTION repeatedly to select g to record on one side.
Select j (or RELAY) to record on both sides.
To stop recording
• When you want to record on the reverse side, press
h after pressing z REC so that the indicator on
the h button (for the reverse side) lights up green.
• When you record on both sides, be sure to start
from the front side. If you start from the reverse
side, recording stops at the end of the reverse side.
• For recording from the tape:
If you set the direction to j when the tapes you
use have different lengths, the tapes in each deck
reverse independently. If you select RELAY, the
tapes in both decks reverse together.
Recording from a tape
repeatedly until "TAPE"
Insert the tape you want to
record into deck A.
Press H SPEED DUB.
• To record with the surround effect, press DSP so
The equalizer setting effects will not be recorded.
• For recording from the radio:
If noise is heard while recording from the radio,
move the respective antenna to reduce the noise.
Press FUNCTION or
repeatedly until the
source or band you
want to record appears.
Insert the CD/tape, or
tune to the station you
want to record.
Press z REC.
Start playing the source
to be recorded.