Setting The Time; Saving The Power In Standby Mode - Sony game sync lbt-xg900av Operating Instructions Manual

Setting up the speakers for Dolby
Pro Logic (continued)
Adjusting the speaker volume
of each speaker (Test Tone)
To enjoy Dolby Pro Logic Surround sound,
adjust the volume of each speaker using the test
tone that the system provides.
1
Press PRO LOGIC when the power is
on.
The button lights up.
2
Press T. TONE on the remote.
The test tone is heard from the speakers in
the following order.
LEFT t CENTER t RIGHT t
REAR t .....
3
From your listening position, press
CENTER LEVEL +/– and REAR LEVEL
+/– on the remote to adjust the volume
levels.
The volume levels from each speaker
should be the same.
4
Press T. TONE when you are done
adjusting.
The test tone is turned off.
GB
10

Setting the time

1
Turn on the system.
2
Press c/CLOCK SET.
When you set the time for the first time,
skip to step 5.
3
Press v/V repeatedly to select "SET
CLOCK."
4
Press ENTER/NEXT.
5
Press v/V repeatedly to set the hour.
6
Press ENTER/NEXT.
The minute indication flashes.
7
Press v/V repeatedly to set the minute.
8
Press ENTER/NEXT.
The clock starts working.
Tip
If you've made a mistake or want to change the time,
start over from step 2.
Note
The clock settings are canceled when you disconnect
the power cord or if a power failure occurs.
Saving the power in
standby mode
Press POWER SAVE/DEMO (STANDBY)
when the power is off. Every time you
press the button, the system switches as
follows:
Power Saving Mode y Demonstration
The system is turned on/off by pressing ?/1.
Tips
• The ?/1 indicator lights up even in the Power
Saving Mode.
• The timer works in the Power Saving Mode.
• Everytime you press DISPLAY when the power is
off, the display changes as follows:
Demonstration y Clock
Note
You cannot set the time in the Power Saving Mode.
To cancel the Power Saving Mode
Press POWER SAVE/DEMO (STANDBY) to
show the demonstration.