Operating On Hills - Husqvarna LZ 25 Operator's Manual

In order, for example, to turn right while
moving forward, move the right control
towards the neutral position. The rotation
of the right wheel is reduced and the
machine turns to the right.
Turning on the spot can be achieved by
moving one control backward (behind the
neutral position) and carefully moving the
other steering control forward from its
neutral position.

Operating on hills

Read the Safety Instructions "Driving on
Slopes" in the "Safety Instructions" section
WARNING!
Do not drive up or down
hills with slopes greater
than 10 degrees. And do not
drive across any slopes.
• The slowest speed possible should be
used before starting up or down hills.
• Avoid stopping or changing speed on
hills.
• If stopping is absolutely necessary, pull
drive levers into the neutral position and
push to the outside of the unit and
engage the park brake.
IMPORTANT INFORMATION
Control levers return to neutral when
released. This may cause the mower to
suddenly stop.
• To restart movement, release the park
brake.
• Pull the control levers back to the center
of the mower and press forward to regain
forward motion.
• Make all turns slowly.
OPERATION
.
Stopping conditions
Released parking brake
8011-640
8011-511
31
English-