Page 1
Please Read Before First Use The clock on the TRX20 model must first be set, before the coffeemaker will operate. For better tasting tea and coffee, use Mr. Coffee@ brand filters. Mr. Coffee Replacement Model TD10 - 10 Decanter Model TD12 - 12...
Breakage may occur if the following instructions are not followed: Use only decanters specifically designed for Pause ‘N Serve models. a. This decanter is designed for use with your Mr. Coffee coffeemaker and therefore must never be used on a rangetop or in any oven, including a microwave.
To as&t us in serving you, (TR10, TRX20) and date of purchase available. All repairs must be made by Mr. Coffee or an authorized Mr. Coffee Service Center. Please call us for assistance or for the location of the nearest authorized Mr. Coffee Se&e Center.
Introduction Congratulations! You are the owner of a Mr. Coffee@ Coffeemaker. A decanter- activated Pause ‘N Serve drip-stop valve allows you up to 30 seconds to sneak a cup YY&!Q the coffee is still brewing. The TRX20 model features a Programmable Timer and two-hour Automatic Shut-Off.
Setting the Clock and Timer (TRX20 IMPORTANT: Please Read Before First Use The clock on this model must first be set, before the coffeemaker will operate. To Set the Clock... 1. Turn the control switch to OFF. Plug the power cord into your electrical outlet. The clock display will flash until you set the time.
If the clock display is flashing on the TRX20 model, the coffeemaker will not operate until the clock is set. See page 5 to set the clock. Slide the filter basket open and insert a Mr. Coffee@ brand paper filter into the filter basket.
WITHIN 30 SECONDS IF REMOVED DURING BREWING. AutOm8tk shut-Off(TRX20 Only) Your coffeemaker will keep your coffee hot for two hours and then automatically shut off. To keep your coffee hot for an additional two hours, slide the control switch to OFF and then to ON.
Mr. Coffee warrants to the purchaser that the TRI0 or TRX20 by Mr. Coffee (except for cord set) is free from manufacturer’s defects in material and workmanship for a period of one year from the date of original purchase when used in compliance with direc- tions as outlined in the manufacturer’s instructions, which will con-...