JVC AX-V8000 Service Manual page 5

Audio/video control amplifier
Hide thumbs Also See for AX-V8000:
Table of Contents

Advertisement

3.1.3 Removing the front panel assembly
(See Figs.3 to 6)
• Prior to performing the following procedure, remove the top
cover, side panels and stay bkt.
(1) From the top side of the main body, cut off the tie band
fixing the wire. (See fig.3)
(2) Remove the three screws F attaching the front panel
assembly. (See fig.3)
(3) Remove the screw G attaching the lug wire. (See fig.3)
(4) From the bottom side of the main body, remove the four
screws H attaching the front panel assembly and take out
the front panel assembly forward. (See fig.4)
(5) From the front side of the main body, disconnect the wire
from the connectors CN971, CN977,
on the system control board. (See fig.5)
(6) From the reverse side of the front panel assembly,
disconnect the wire from the connector
AV in board. (See fig.6)
(7) Disconnect the wire from the connector
DIGITAL in board. (See fig.6)
Reference:
When attaching the screws F and screw G, attach the lug wire
with it.
CN983
and
CN985
CN973
on the front
CN373
on the front
Front AV in board
F
G
(fixing the
lug wire)
Fig.3
H
Fig.4
System control board
CN983
CN977
Fig.5
CN973
CN373
Front DIGITAL in board
Fig.6
Front panel assembly
Tie band
Front panel
assembly
CN985
CN971
(No.MB177)1-5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents