Advertisement
4) Reassemble in reverse order. Be very careful not to pinch any of the wires and make
sure the wires are in the wire guides before assembling.
To replace the Marker Lights, follow steps 1 through 2 and then follow the steps below.
5) Remove the two screws that hold the window glass on the end w/ the marker lights.
7) Pull the marker lights out of the lanterns and replace.
8) Reassemble in reverse order. Be very careful not to pinch any of the wires and make
sure the wires are in the wire guides before assembling.
The LED in the Lantern has a very long life span. Should it fail contact the M.T.H.
Parts Department or authorized Service Center.
You can obtain replacement bulbs directly from the M.T.H. Parts Department
(Order online: www.mth-railking.com, e-mail: parts@mth-railking.com,Fax: 410-423-0009,
Phone: 410-381-2500, Mail: 7020 Columbia Gateway Drive, Columbia MD 21046-1532, ).
Advertisement
