Download  Print this page

Advertisement

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
GETTING READY
c
Lower the needle threader lever on the left
side of the machine, and then slowly return the
lever to its original position.
a
a Needle threader lever
The thread is passed through the eye of the
needle.
Note
If the needle was not completely threaded,
but a loop in the thread was formed in the
eye of the needle, carefully pull the loop
through the eye of the needle to pull out the
end of the thread.
CAUTION
● When pulling out the thread, do not pull
it with extreme force, otherwise the
needle may break or bend.
32
d
Raise the presser foot lever, pass the end of the
thread through the presser foot, and then pull
out about 5 cm (2 inches) of thread toward the
rear of the machine.
a 5 cm (2 inches)
The upper threading is finished.
Now that the upper threading and the lower
threading are finished, you are ready to
begin sewing.
Note
If the needle is not raised, the needle
threader cannot thread the needle. Be sure
to press
(needle position button) to raise
the needle before using the needle threader.
a

Advertisement

Table of Contents

   Related Manuals for Brother 885-V14

Comments to this Manuals

Symbols: 0
Latest comments: