Troubleshooting - Craftsman T1600 247.203744 Operator's Manual

Enginefails to start
Enginerunserratically
1. PTO/BladeEngageleverengaged.
2. Parkingbrakenotengaged.
3. Sparkplugwire(s) disconnected.
4. Throttle/Chokecontrollevernot in correct
startingposition.
5. Chokenotactivated
6. Fueltank empty,or stalefuel.
7. BIockedfuel line.
8. Faultyspark plug(s).
9. Engineflooded.
10. BlownFuse(s)
1. Unit runningwith CHOKEactivated.
2. Sparkplugwire(s) loose.
3. Blockedfuel line or stalefuel.
4. Ventin gas cap plugged.
5. Wateror dirt in fuel system.
6. Dirtyair cleaner.
Engineoverheats 1. Engineoil levellow. 1.
2. Air flow restricted. 2.
Enginehesitatesat high RPM 1. Sparkpluggaptoo close. 1.
Engineidles rough 1. Sparkplugfouled,faultyor gap too wide. 1.
2. Dirtyair cleaner. 2.
Excessive vibration
Mowerwill not mulchgrass
Unevencut
1. Cuttingbladelooseor unbalanced.
2. Damagedor bentcuttingblade.
1. Enginespeedtoo low.
2. Wetgrass.
3. Excessively high grass.
4. Dullblade.
1. Decknot leveledproperly.
2. Dullblade.
3. Uneventire pressure.
1. Placeleverin disengaged(OFF) position.
2. Engageparkingbrake.
3. Connectwire(s)to sparkplug(s).
4. PlaceThrottle/Chokeleverintothe FASTposition.
5. MovetheThrottle/Chokeleverintothe Choke
position.
6. Filltank with clean,fresh (less than30 daysold) gas.
7. Replacethe fuel line and replacefuel filter.
8. Clean, adjustgap or replaceplug(s).
9. Crank enginewith throttlein FASTposition.
10. ReplaceFuse(s)See "Fuse"in Serviceand
Maintenance section.
1. Deactivate the CHOKE.
2. Connectspark plugwire(s).
3. Replacethe fuel line;fill tank with clean,fresh
gasolineand replacefuel filter.
4. Clear ventor replacecap if damaged.
5. Drainfuel tank. Refillwith clean,fresh gasoline.
6. Replaceair cleanerpaperelementor cleanfoam
pre-cleaner, i f equipped.
Fillcrankcasewith properamountand weightof oil.
Cleangrass clippingsand debrisfrom aroundthe
engine'scoolingfins and housing.
Removesparkplug and resetthe gap.
Replacesparkplug.Set pluggap.
Replaceair cleanerelementand/orclean pre-
cleaner.
1. Tighten bladeand spindle.
2. Replaceblade.
1. Placethrottlein FAST(rabbit)position.
2. Do notmulchwhengrass is wet.
3. Mowonce at a highcuttingheight,then mowagain
at desiredheightor makea narrowercuttingswath.
4. Sharpenor replaceblade.
1. Performside-to-sidedeck adjustment.
2. Sharpenor replaceblade.
3. Checktire pressurein all fourtires.
NEED MORE HELP?
%£{_ls_l fim_} t}*_e_:_x/,',{'w(sr an<I moze on manag<'_ly[i£eo{o_, - fo[ f_e÷!
Find this and a[[ your other product manuals online.
Get answers from our team of home experts.
Get a personalized maintenance plan for your home.
Find information and tools to help with home projects.
26